This video is an in depth tutorial on how to setup voicemeeter banana for streaming to twitch, beam, or hitbox with obs or xsplit and having full discord or skype functionality using vb cable (virtual audio cable). You will be able to route audio to your stream and headphones/speakers separately. To access settings, click on the file tab and select settings.
Obs by default will allow two desktop audio sources and four microphone sources. For desktop audio 2 select from the drop down. Set the default playback device to voicemeeter banana.
After installing voicemeeter banana and having your computer restarted, start voicemeeter banana and make sure you check the option system tray (run at startup) option via the menu first. Make you microphone sound a crap ton better voicemeeter banana: Voicemeeter banana can easily work with 5 audio sources in which 3 are physical channels and 2 are the virtual channels setting up the hardware for dual streaming on pc this process is divided into two sections, setting up the hardware is the first.
In voicemeeter banana click on «menu» in the upper right corner and select «system tray (run at startup)» in the dropdown menu. Now click on the small loudspeaker symbol in the lower right corner of the desktop and click on «open sound settings» and then click on «sound control panel» on the right. Stream audio (alerts, music, pc sounds) first, click the button on to enable.
Next select bus b1 as the source. (b1 is our main output) now, under stream name call it stream audio. You will also use the same exact name in vban on the gaming pc.
For the ip address to, enter the ip address of your gaming pc. Voicemeeter potato is the most advanced of three mixers: Voicemeeter, banana, and potato.
Here is my basic stream setup. There are two different kinds of inputs and outputs. To set this up, you’ll need to make a few changes to your windows audio settings.
Click the hidden icons arrow in your windows toolbar in the bottom right of your screen and rich click the icon. Click ‘open sound settings’. Complete obs studio setup playlist:
This video is an in depth tutorial on how to setup voicemeeter banana for streaming to twitch, beam, or hitbox with obs or xsplit and having full discord or. The installation process of voicemeeter banana is not that difficult and does not differ from the standard process of any software setup. But in addition, you must be ready to connect your hardware and setup input for it to work well.
That is why the installation process usually consists of several stages and it is important to read this guide. A good ratio to start at is 4:1 and you can adjust from there. An eq filter changes the sound and tone of your voice to make it richer or improve clarity.
Moving the red square around in the intellipan window to the left and down a bit. I have made an updated video that is more detailed than this one on setting up voicemeeter, and uses potato. I've changed my approach on how.
Select the hdmi audio device of your graphics card in the hardware out section (green) in the blue and yellow sections activate the buttons for the corresponding hardware out (a1, a2 or a3) to send the sound through your hdmi audio device to your. Learn how to setup voicemeeter banana for live streaming success. In this video, learn how to setup voicemeeter banana for streaming with streamyard. when usi.
