How to use avery dark fabric transfer paper: Prepare your garment by washing and drying it. Create a design in design space or using avery’s free templates.
Print out the image the normal way around with an inkjet printer (no need to reverse) cut out the image. Place transfer onto the garment with the image facing up. Don't use any water or steam.
Remove the liner from the transfer paper with your design. Lay a sheet of parchment paper over top of your design. Let cool for 2 minutes.
Next, iron the transfer paper, making sure you reach every corner. It’s best to place the image 4 inches below the neckline. Before you feed the actual transfer paper into your inkjet printer, insert a regular plain paper and press the print button.
Print on the transfer paper. Make sure the image is straight and in the correct position. Press the iron firmly onto the t shirt, applying pressure with your whole hand.
Your transfer paper should specify how long to iron. It may take anywhere from 30 seconds to a few minutes. Move the iron as little as possible to maintain even, constant heat over the entire image.
Place your shirt on the heat press and place the transfer paper on it such that the printed side touches your shirt exactly where you want your design to go. Check that the transfer paper hasn’t shifted or. Now for the exciting bit!
It was easy, but i don't think it's gonna sta. Cut the saran wrap in half. Now, sandwich the paper so that the saran wrap covers both sides.
Smoothing out the saran wrap. Smooth out the edges, so there’s no air or bubbles. Cutting around the picture carefully.
